Bosch VJT-X20S Installation And Operating Manual page 101

VideoJet X20
The time bar offers various options for navigation.
Red bars indicate the points in time where alarms were triggered. Drag the green arrow to
navigate to these points quickly.
1.
2.
Buttons
You can control playback by means of the buttons below the video image. The buttons have
the following functions:
Slide Control
You can use the slide control to control playback speed.
Bookmarks
In addition, you can set markers in the sequences, so-called bookmarks, and jump directly to
these. These bookmarks are indicated as small yellow arrows above the time interval. Use the
bookmarks as follows:
NOTICE!
i
Bookmarks are only valid while you are in the RECORDINGS page; they are not saved with the
sequences. As soon as you leave the page all bookmarks are deleted.
Trick Mode
If you are using a mouse with a scroll wheel, you can view recordings frame by frame in trick
mode. To do this, place the mouse cursor in the timeline below the timescale and turn the
scroll wheel. Playback is automatically stopped (paused) during scrolling. Trick mode requires
Bosch Security Systems
You can change the time interval by clicking the zoom keys (magnifying glass icons). The
display can span a range from two months to a few seconds.
Drag the green arrow to the point in time at which playback should begin. The date and
time display below the bar provides orientation to the second.
Start or pause playback
Jump to the start of the active video sequence or to the previous sequence
Jump to the start of the next video sequence
Jump to the previous bookmark
Set bookmark
Jump to the following bookmark
Right-click a bookmark to delete it.
Installation and Operating Manual
Operation | en 101
DOC | V4.0 | 2009.06