Bosch VJT-X20S Installation And Operating Manual page 28

28 en | Configuration Using a Web Browser
Establishing the Connection
Before you can operate the VideoJet X20 within your network, it must have a valid IP address
for your network and a compatible subnet mask.
The following default address is preset at the factory: 192.168.0.1
1.
2.
Maximum Number of Connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each VideoJet X20 can have up to 25 Web
browser connections or up to 50 connections via VIDOS or Bosch Video Management System.
DOC | V4.0 | 2009.06
Start the Web browser.
Enter the IP address of the VideoJet X20 as the URL. The connection is established and
after a short time you will see the LIVEPAGE with the video image.
Installation and Operating Manual
VideoJet X20
Bosch Security Systems