Leds - Bosch VJT-X20S Installation And Operating Manual

VideoJet X20
8.4

LEDs

The VideoJet X20 network video server has a number of LEDs on its front and rear panels that
show the operating status and can give indications of possible malfunctions:
Power On LED
Does not light up:
Lights up green:
SFP LED
Does not light up:
Lights up yellow:
Flashes yellow:
ETH 1 LED
Does not light up:
Lights up yellow:
Flashes yellow:
ETH 2 LED
Does not light up:
Lights up yellow:
Flashes yellow:
Connect LED
Lights up red:
Lights up green:
Flashes green:
Flashes red:
HDD LED
Does not light up:
Lights up orange:
Flashes orange:
Bosch Security Systems
VideoJet X20 is switched off.
VideoJet X20 is switched on.
No connection.
Connection established.
Data being transmitted.
No network connection.
Network connection established.
Data being transmitted over the network.
No network connection.
Network connection established.
Data being transmitted over the network.
Startup in progress.
Startup complete, VideoJet X20 is operational.
Video connection established.
VideoJet X20 is faulty, for example following failed
firmware upload.
No hard drive fitted.
Hard drive fitted.
Hard drive activity.
Installation and Operating Manual
Appendix | en 113
DOC | V4.0 | 2009.06