Malfunctions With Iscsi Connections - Bosch VJT-X20S Installation And Operating Manual

112 en | Appendix
8.3

Malfunctions with iSCSI Connections

Malfunction
After connecting to the
iSCSI destination, no
LUNs are displayed.
After connecting to the
iSCSI destination, "LUN
FAIL" appears below a
node.
LUN mapping is not
possible.
DOC | V4.0 | 2009.06
Possible causes
Incorrect LUN mapping during
iSCSI system configuration.
The LUN list could not be read,
as it was assigned to the wrong
network interface.
Some iSCSI systems do not
support the use of an initiator
extension.
Installation and Operating Manual
VideoJet X20
Recommended solution
Check the iSCSI system
configuration and reconnect.
Check the iSCSI system
configuration and reconnect.
Delete the initiator extension on
the Identification configuration
page.
Bosch Security Systems