Table of Contents
Advertisement
Chapter 3
75
To change this
The packet size for
transferring data
The FTP settings
4. Click Apply.
5. When the confirmation message displays, click OK.
Note:
If you changed the IP address of the storage system, you must
now access the Manager using the new IP address.
Do this
Specify whether or not to transfer larger data packets
between the storage system and the computers in your
network by selecting or clearing the Jumbo Frames check
box.
If you clear this option, the storage system will use 1514-byte
packets.
If you select this option, you can specify a larger packet size
(from 1514 to 9014 bytes).
Note:
Using jumbo frames allows you to transfer data more
quickly. However, you can select this option only if your
network, Ethernet switch, and the network interface cards
(NICs) on the computers in your network support the
specified packet size. To determine whether you can use
jumbo frames, refer to the documentation for those
components.
If you want to use the storage system as an FTP server,
select the Enable FTP server check box.
If you do not want to use the storage system as an FTP
server, clear this option.
For information about accessing the storage system using
FTP, refer to
"Accessing shared folders using
Managing Your Storage System
FTP".
Altos easyStore Manual
75
Hide quick links:
Advertisement
Table of Contents
