Table of Contents
Advertisement
Appendix B
Adding hard disks to a degraded RAID configuration
150
To add a hard disk to a degraded RAID configuration:
1. Insert the hard disk into the storage system.
You can do this whether the storage system is powered on or off.
2. Access the Manager or refresh the browser window.
The Disk Change Notification page displays:
Note:
Initially, the Disk Status for the new disk might display Spare
rather than Rebuilding. If this occurs, refresh the page to update the status.
3. Click Continue to continue rebuilding the disk and return to the Manager.
The Disks page shows the progress of the rebuilding progress.
Alternatively, if the information on this page is not correct, click Scan to scan the
storage system again and update the page.
You can also click Shut Down to shut down the storage system. When you
restart the storage system, this page re-displays.
Disk Configurations
Altos easyStore Manual
Hide quick links:
Advertisement
Table of Contents
