Chapter 5
141
10. Click Restore.
The Protected disk list displays the disk or partition that you are currently
booting from.
11. In the Backups list, select the most recent backup.
You cannot recover any backup except the most recent one.
Note:
If no backups appear in this list, the backup that you booted from is
not using the same recovery password as the storage system. This can occur if
you changed the recovery password on the storage system before booting
remotely, or if you changed it between backups in DiskSafe Express and
booted from an earlier backup. To resolve this issue, you must reset the
password in the Microsoft iSCSI Initiator (as described in
recovery password in the Microsoft iSCSI
DiskSafe Express.
12. Click Restore Disk.
Protecting Local Disks
"Resetting the
Initiator"). Then restart
Altos easyStore Manual