Acer Altos EasyStore User Manual page 132

Hide thumbs Also See for Altos EasyStore:
Table of Contents

Advertisement

Chapter 5
125
4. Click Enable.
A message displays, advising you that your network connection will be
temporarily interrupted.
5. Click Yes to allow the temporary network interruption. (Your network connection
will be restored immediately after this process is complete.)
On the Enable Remote Boot dialog box, the Details area shows the progress of
the enabling process. If any problems are encountered—for example, if the
selected disk or partition was not your system disk—that portion of the process
is marked as Failed. You can click the plus sign next to the process description
to expand it and display an error message that explains exactly what happened.
6. When a message displays, advising you that drivers will be installed, click OK.
7. When the drivers are installed, one or more messages might appear, advising
you that these drivers are not signed. This has no adverse effect on your
system. Click Continue Anyway or Yes on each message to proceed with the
installation.
In addition, the Found New Hardware Wizard starts. Select No, Not This Time
on the initial screen and complete the rest of the wizard, accepting all the default
values.
If remote boot was successfully enabled (as indicated in the Details area), a
new backup is created automatically.
Note:
If remote boot was successfully enabled but for some reason the
new backup was not created (as indicated in the Details area), you must perform
a
manual backup (as described in
page 116). You can remotely boot only from backups that were performed
after remote boot was enabled.
8. Click Close.
If no problems were encountered, you can now remotely boot from the storage
system (as described in
If any problems were encountered, take corrective action. For example, if you
did not previously protect a system disk or partition, do so now (as described in
"Protecting your
disks"). Then repeat this procedure for enabling remote boot until
all parts of the process complete successfully.
"Manually backing up your disk"
"Recovering a system disk while booting
Protecting Local Disks
on
remotely").
Altos easyStore Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents