Acer Altos EasyStore User Manual page 78

Chapter 3
71
3. Make the desired changes:
To change this
The storage system name In the Storage system name text box, enter the new
The system date, time, or
time zone
Network Time Protocol
(NTP) server name or IP
address
The administrator name
or password
4. Click Apply.
5. When the confirmation message displays, click OK.
Do this
name to use for the storage system.
This name can be up to 15 characters long and can
include letters, numbers, and hyphens.
Note: If you change the name of the storage system, be
sure to also change that name in any local hosts files or
on the DNS server in your network. The storage system
does not register its name with your DNS server
automatically.
In Active Directory authentication mode, you cannot
change the storage system name.
In the Date fields, enter or select the desired month, date,
and year.
In the Time field, enter or select the desired hour, minute,
and second.
In the Time zone list, select the desired time zone.
Note: The storage system time does not automatically
change to reflect daylight savings time. To accommodate
this, you can manually adjust the time and/or time zone as
needed.
In the NTP server name or IP address text box, enter the
name or IP address of the NTP server from which the
storage system should set its time. You can use a name
only if it is resolvable.
The storage system will synchronize its time with the NTP
server every hour.
In the Administrator name text box, enter the user name
to use for logging in to the Manager.
In the Password and Confirm password text boxes,
enter the password to use for logging in to the Manager. It
cannot contain multi-byte words. This means you can only
enter ASCII character whose code value is less than 128.
The user name and password are case-sensitive.
Managing Your Storage System
Altos easyStore Manual 71