Acer Altos EasyStore User Manual page 17

Chapter 2
10
Note: If you connect a storage system to the network after the Console has
already scanned it, or if you subsequently change the IP address of the
storage system, you must click Discover Storage Systems to scan the
network again and update the tree in the left pane.
If no storage system displays in the left pane, your computer might not be in
the same subnet as the storage system. Be sure to install the Console on a
computer in the same subnet as the storage system and try again.
2. In the left pane, select the name of the storage system that you want to access
(for example, Storage), and then click Log On Storage System Manager.
If your storage system uses both available ports to connect to the network, you
can select either item.
3. If your storage system has not yet been initialized, the System Initialization
page displays. For more information, refer to the next section,
disks."
If your storage system been initialized but not yet configured, the welcome page for
the System Setup Wizard displays. For more information, refer to
"Configuring your storage
If your storage system has been initialized and configured, the login page for the
Manager displays. For more information, refer to
system".
Getting Started
"Initializing the
"Logging in to the Manager".
Altos easyStore Manual 10