Acer Altos EasyStore User Manual page 145

Chapter 5
138
19. When the completion screen displays, review the results and do one of the
following:
To do this
Recover another disk
or partition
Restart the computer
20. When the computer restarts, use the appropriate procedure for your system to
configure it to boot from the local hard disk once more.
If your computer is configured to boot from the local hard disk if no CD is in the
CD-ROM drive, simply remove the recovery CD from the CD-ROM drive before
restarting.
21. If you changed the recovery password on the storage system, reset it in the
Microsoft iSCSI Initiator (as described in
the Microsoft iSCSI
22. Start DiskSafe Express and remove protection from the recovered disk or
partition (as described in
23. Protect the recovered disk once again (as described in
), re-using the original backup.
Do this
Select Recover Another Disk.
If you want to recover a different backup of the same computer
from the same storage system, select No to retain the current
configuration settings and return to step 10.
If you want to recover a different computer's backup, or if you
want to recover a backup from a different storage system,
select Yes to modify the current configuration settings and
return to step 6.
Select Restart Computer.
When the informational message displays, select OK.
When prompted to confirm that you want to restart the
computer, select Yes.
You have 10 seconds to remove the recovery CD from the
CD-ROM drive.
"Resetting the recovery password in
Initiator").
"Removing protection").
Protecting Local Disks
"Protecting your disks"
Altos easyStore Manual