Removing Protection - Acer Altos EasyStore User Manual

Hide thumbs Also See for Altos EasyStore:
Table of Contents

Advertisement

Chapter 5

Removing protection

143
If you no longer want to back up a particular disk or partition, you can remove
protection as long as a recovery is not currently in progress for that disk or partition.
(If a recovery is in progress, you must cancel it or wait until it completes before you
can remove protection.)
Note:
If you plan to delete a protected partition, be sure to remove protection
before you delete that partition. Otherwise, you might not be able to protect other
partitions on that disk.
When you remove protection for a disk for which remote boot is enabled, remote
boot will be disabled and your computer will restart.
When you remove protection, you will no longer be able to back up the selected disk
or partition either automatically or manually, and you cannot recover data using
DiskSafe Express (as described in
disk"). However, the backups that currently exist on the storage system are retained,
and you can recover them using the recovery CD
(as described in
"Recovering a system disk using the recovery
If you subsequently want to protect the same disk or partition again, you can re-use
the existing backups. You can also delete the existing backups on the storage
system to free up space for backups of other disks or partitions, either for this
computer or other computers. For more information, refer to
To remove protection:
1. In the Protected disk list on any page, select the disk for which you want to
remove protection.
2. From the Action menu, click Remove Protection.
3. When the confirmation message displays, click Yes.
The disk disdisplays from the Protected disk list. If another disk is protected,
that disk displays in the Protected disk list, and information about that disk now
displays in the application window. If no other disk is protected, click OK on the
informational message; the Protected disk list and application window are
blank.
4. If remote boot was enabled, it is disabled. When prompted, click OK to restart
your computer.
"Recovering files or folders"
Altos easyStore Manual
Protecting Local Disks
and
"Recovering a data
CD").
"Deleting a
backup".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents