Table of Contents
Advertisement
Chapter 5
Replacing your existing license
107
4. If you did not save the file to a shared folder, take the floppy disk or USB disk to
a computer with Internet and e-mail access.
5. From the computer that has Internet and e-mail access, e-mail the license file to
the following address:
Activate.Keycode@falconstor.com
6. When you receive an e-mail response, save the returned license file back to the
shared folder, floppy disk, or USB disk.
7. If you did not save the file to a shared folder, take the floppy disk or USB disk
back to the computer where DiskSafe Express is installed.
8. From the Action menu, click License --> Offline Activation.
9. Click Import Activation Code.
10. On the Open dialog box, browse to the location where the returned license file
exists and double-click it.
11. On the confirmation message, click OK.
The license is now activated and you can continue to back up and recover your
disks.
12. To close the dialog box, click Exit.
To replace your existing license:
1. From the Action menu, click License --> Add License.
The Add License dialog box displays your current license key code.
2. In the License key code text box, enter the new key code.
3. Click OK.
4. When the confirmation message displays, click OK.
If your computer has an Internet connection, the license is activated
automatically. If your Internet connection is temporarily down, your license will be
activated automatically the next time you run DiskSafe Express with a restored
Internet connection. If this computer does not have an Internet connection, you
must perform offline activation (as described in the previous section.)
Protecting Local Disks
Altos easyStore Manual
Hide quick links:
Advertisement
Table of Contents
