Acer Altos EasyStore User Manual page 60

Chapter 3
53
1. In the navigation bar, click Users.
2. In the left pane, click either Users & Computers or Groups.
3. Click Synchronize.
The page displays the progress of the synchronization.
Notes:
Your storage system supports only 128 users and 128 groups. If the
l
selected organizational unit on your Active Directory server currently
exceeds these maximums, the excess users or groups will not be added
to the storage system.
If the clocks of the storage system and the Active Directory server differ by
l
more than five minutes, errors will occur when the two systems synchronize.
You must adjust the storage system time, time zone, or both
to ensure that they match (as described in
Even if the storage system and Active Directory server are in the same time
zone and have the same time, errors might still occur if the Active Directory
server adjusts for daylight savings time. In this case, you must change both
if the Active Directory server time is 2:00 P.M. in the Central Time zone
(GMT-06:00), you would set the storage system time zone to Eastern
Time (GMT-05:00) and then set the time to match the Active Directory
server (14:00). If you do this, do not synchronize the storage system with an
NTP server, as the time will be readjusted based on the time zone.
the time zone and time on the storage system. For example,
Managing Your Storage System
"Changing the system
Altos easyStore Manual
settings").
53