Table of Contents
Advertisement
Chapter 5
Installing DiskSafe Express
100
6. On the page with installation options, click Next. (Initiator Service and
Software Initiator are selected by default.)
7. If a message box displays telling you to configure the settings in the Control
Panel, click OK.
Note:
You do not have to configure the Microsoft iSCSI Initiator.
DiskSafe Express will configure it for you automatically.
8. If you agree to the terms of the license agreement, select I Agree and then click
Next.
9. When the installation completes, click Finish.
After your computer restarts, you can install DiskSafe Express.
You must install DiskSafe Express on each computer whose local disks you want to
protect.
To install DiskSafe Express:
1. Log on as an administrator and insert the installation CD into a CD-ROM drive.
2. Start the setup utility for DiskSafe Express.
3. If the Microsoft iSCSI Initiator 2.0 is already installed, go to step 4.
If this component is not currently installed, the following prompt displays:
Click OK to go to the Microsoft website and then click OK to cancel the
installation of DiskSafe Express.
On the Microsoft website, click iSCSI Software Initiator v2.0, and follow the
instructions in
"Installing the Microsoft iSCSI
You must install the Microsoft iSCSI Initiator 2.0 before you can install DiskSafe
Express.
When you have finished installing the iSCSI initiator, re-start the installation of
DiskSafe Express.
Protecting Local Disks
Initiator".
Altos easyStore Manual
Hide quick links:
Advertisement
Table of Contents
