Acer Altos EasyStore User Manual page 51

Chapter 3
44
4. Click Edit.
Note: If the storage system uses Active Directory authentication mode, this
button displays dimmed.
5. Specify which users should belong to this group, and then click OK:
To do this
Add all users to the
group
Add selected users to
the group
Remove all users from
the group
Remove selected users
from the group
a. To select multiple, contiguous users, hold down the Shift key and select the first user,
then select the last user. All users between the first and last selected
user are selected.
To select multiple, non-contiguous users, hold down the Ctrl key as you select each
user.
The selected users move from one list to the other.
On the Groups page, when you select this group in the Groups list, the
adjacent Members list immediately reflects the changes you just made.
Do this
Click Add All Users.
In the Available users list, select the user(s) that you want
to add and then click Add Selected User(s).
Click Remove All Users.
In the Group members list, select the user(s) that you want
to remove from the group and then click Remove Selected
User(s).
a
Managing Your Storage System
a
Altos easyStore Manual 44