Table of Contents
Advertisement
Chapter 5
128
Alternatively, if your computer does not support the recovery CD but does
support the PXE protocol, you can boot your computer from a backup on the
storage system and then recover your system disk. For more information, refer
to
"Recovering a system disk while booting
Caution:
It is strongly recommended that you determine whether or not
your computer supports the recovery CD before a system failure occurs. To do this,
perform steps 1 through 3 in
CD"
and use Diagnostic Mode to confirm that at least one network interface
card is supported.
If your computer does not support the recovery CD, you must enable remote
boot (as described in
Once your system has failed, you cannot enable remote boot.
If your computer does not support either the recovery CD or the PXE protocol,
gather your hardware information (as described in step 3 in
system disk using the recovery
able to obtain an updated recovery CD or a new driver that will make your
computer compatible with your existing recovery CD.
remotely".
"Recovering a system disk using the recovery
"Enabling remote
boot") before a system failure occurs.
CD") and send it to your vendor. You might be
Protecting Local Disks
"Recovering a
Altos easyStore Manual
Hide quick links:
Advertisement
Table of Contents
