Table of Contents
Advertisement
3.3
LCD Display Screen
The LCD display is a 8-line by 16 character screen that indicates the boot
status as well as any BIOS check point errors encountered upon system
initialization. Normally, the system BIOS and the micro-controller firmware
send the LCD display messages that appear on the screen. However, if you
hooked up a special purpose driver to control the LCD module, this driver
define the messages. See the driver manual for more information.
3.3.1
Replacing the LCD Display Screen
The system housing can be configured as a stand-alone tower housing or a
rack mount housing. With each configuration the LCD display screen is
place differently. For more information about the rack mount installation and
configuration, please refer to its user' s guide.
To replace the LCD display screen:
1.
Turn off the power to the system unit and unplug all cables.
2.
Carefully pull out the LCD display screen. There is a connector at the
back of the LCD display.
3.
Disconnect the LCD connector.
4.
Connect the LCD connector at the back of the new LCD display screen.
5.
Attach the LCD display screen to the housing.
System Housing
9
Advertisement
Chapters
Table of Contents
