Acer Altos 11000 System User Manual page 87

PnP/PCI System Configuration
PCI IRQ Sharing ............... [No ]
VGA Palette Snoop .............. [Disabled]
Plug and Play OS ...............
Reset Resource Assignments ..... [No ]
= Move Highlight Bar,
PCI IRQ Setting
This parameter allows for
devices. If you use plug-and-play (PnP) devices, set this parameter
to Auto . The system then automatically assigns IRQ to the PnP
devices. If your PCI device is not a PnP, you can manually assign
the interrupt for each device. Refer to your PCI card manual for more
information.This function
nonconfigurable. It automatically configures the plug-and-play (PnP)
devices installed in your system.
When the PCI IRQ Setting is set to
the IRQ setting fields become gray and non-
configurable.Refer
technical information about the PCI card.
BIOS Utility
[No Yes]
= Change Setting, F1 = Help
Auto or Manual configuration of PCI
is fixed at Auto
to your manual
Page 2/2
setting and is
Auto , all
for
3-31