Table of Contents
Advertisement
These parameters allow you to specify the appropriate interrupt for
each of the PCI devices. You can assign IRQ3, IRQ4, IRQ5, IRQ7,
IRQ9, IRQ10, IRQ11, IRQ12, IRQ14, or IRQ15 to the
parameters specify the auto-assigned interrupt for each of the PCI
devices.
Like the PCI IRQ Setting parameter, these are also
nonconfigurable.
Make sure that the interrupt you assign in
any of the PCI slots are not used by other
devices to avoid conflicts.
Press
or
to move between fields. Press
options.
This item allows you to manually assign the interrupt for the onboard
LAN when the PCI IRQ Setting parameter is set to
parameter is grayed and not user-configurable when the PCI IRQ
Setting is set to
.
Auto
This item allows you to manually assign the interrupt for the
onboard SCSI
device
when the PCI IRQ Setting parameter is set to
. This parameter is grayed and not user-configurable when
Manual
the PCI IRQ Setting is set to
parameter under the Onboard Devices Configuration screen is set to
.
Disabled
3-32
PCI SLOTS
ONBOARD LAN
ONBOARD
SCSI1
Auto
and when the
first
slots.These
or
to select
. This
Manual
first
Onboard SCSI
User' s Guide
Advertisement
Chapters
Table of Contents
