Acer Altos 11000 System User Manual page 85

Onboard SCSI2
This parameter lets you enable or disable the SCSI controller on
board. When enabled, it activates the SCSI function of the system.
When disabled, it also deactivates the function.
When set to Enabled , the system checks for a bootable SCSI device
drive. If it is present, the system boots from the SCSI device;
otherwise, it boots from the drive specified in the System Boot Drive
parameter.
When set to Disabled , the system boots from the drive specified in
the System Boot Drive parameter.
Onboard Ethernet Chip
This parameter lets you enable or disable the LAN function on board.
When enabled, it activates the LAN of the system. When disabled, it
deactivates the function.
3.7.2
BIOS Utility
BOOT FROM SCSI2 DEVICE
3-29