Installing The Processor Heatsink And Fan; Removing The Thermal Tape Protector; Inserting The Clip Ends Into The Processor Holes - Acer Altos 11000 System User Manual

2.4.1

Installing the Processor Heatsink and Fan

Follow these steps when installing the heatsink and fan into the
Pentium II processor module:
1. Remove the thermal tape protector at the back of the heatsink.
Figure 2-6

Removing the Thermal Tape Protector

2. Insert the wide clip ends into the wide holes on the processor and
the narrow clip ends into the narrow holes.
Figure 2-7

Inserting the Clip Ends into the Processor Holes

2-10 User' s Guide