Bypassing the Setup Password
If you forget your setup password, you can bypass the password
security feature by hardware.
password:
1.
Turn off and unplug the system.
2.
Open the system housing and set JP3 to
password function.
3.
Turn on the system and enter the BIOS utility. This time, the
system does not require you to type in a password.
You can either change the existing Setup
password or remove it by selecting
Refer to the previous section for the
procedure.
3.8.3
3-46
Follow these steps to bypass the
to bypass the
2-3
User' s Guide
.
None