Table of Contents
Advertisement
Installing the Power Supply Compartment Metal Cover
The power supply compartment metal cover has two important
functions:
1.
It prevents you from accidentally touching the power backplane.
2.
It guides the thermal air flow to the fan exhausts on the rear of
the housing.
Follow these steps to install the metal cover:
1.
Insert the tab on the right side of the metal cover into the groove
on the compartment.
2.
Carefully push the metal cover until it fits in place.
Figure 3-52
Installing the Power Supply Compartment Metal
Cover
System Configuration
Groove
Tab
3-61
Advertisement
Table of Contents
