Table of Contents
Advertisement
4.5.1
System POST Mode
This parameter allows the system to perform the POST routines in
Diagnostic
and
Normal
the current status on the front panel LCD display. The default setting
is
Normal
.
4.5.2
Silent Boot
This parameter enables or disables the Silent Boot function. When
set to
Enabled
, BIOS is in graphical mode and displays only an
identification logo during POST and while booting. After which the
screen displays the operating system prompt (such as DOS) or logo
(such as Windows 95).
system automatically switches to the text mode.
Even if your setting is
Enabled
while booting by pressing
activation of the keyboard.
When set to
Disabled
, BIOS is in the conventional text mode where
you see the system initialization details on the screen.
4.5.3
Num Lock After Boot
This parameter allows you to activate the Num Lock function upon
booting. The default setting is
4.5.4
Memory Test
When set to
Enabled
, this parameter allows the system to perform a
RAM test during the POST routine.
system detects only the memory size and bypasses the test routine.
The default setting is
Disabled
4-14
modes. The
Diagnostic
If any error occurred while booting, the
, you may also switch to the text mode
after you hear a beep that indicates the
Enabled
.
When set to
.
AcerAltos 19000Pro4 System Guide
mode shows
, the
Disabled
Advertisement
Table of Contents
