Table of Contents
Advertisement
Onboard Devices Configuration
Onboard Floppy Disk Controller ...... [Enabled ]
Onboard IDE Primary Channel ......... [Enabled ]
Onboard PS/2 Mouse (IRQ 12) ......... [Enabled ]
Onboard SCSI1 ....................... [Enabled ]
Boot from SCSI1 Device ........... [Enabled ]
OnboardSCSI2 ........................ [Enabled ]
Boot from SCSI2 Device ........... [Enabled ]
Onboard Ethernet Chip ............... [Enabled ]
= Move Highlight Bar,
PgUp/PgDn = Move Screen
Serial Port 1
This parameter allows you to enable or disable the serial port 1.
This function lets you set a logical base address for serial port 1. The
options are:
3F8h
2F8h
3E8h
2E8h
This function lets you assign an interrupt for serial port 1. The options
are IRQ
3
and
4
.
The Base Address and IRQ parameters are
configurable only if Serial Port 1 is enabled.
4-18
= Change Setting, F1 = Help
BASE ADDRESS
IRQ
AcerAltos 19000Pro4 System Guide
Page 2/2
Advertisement
Table of Contents
