Table of Contents
Advertisement
4.
Lift up the CPU socket lever.
5.
Look at the underside of the CPU and note the area where the
pins are denser or closely embedded. Gently insert the CPU
pins into the socket, matching the denser pins with the denser
holes on the socket.
Be careful not to bend any pins.
6.
Push down the socket lever.
7.
Connect the CPU fan cable to connector CN17 (for CPU 1) on
the system board.
connectors.
8.
Connect the thermal sensor cable to connector CN19 (for CPU1)
on the system board. See Table 3-5 for other connectors.
STEP 4
Denser Holes
STEP 6
Figure 3-26
Installing a Pentium Pro CPU
3-30
See Table 3-5 for other CPU cable
STEP 5
Denser Pins
STEP 7
3-pin Fan Cable
2-pin Thermal Sensor Cable
AcerAltos 19000Pro4 System Guide
Advertisement
Table of Contents
