3.
Press and pull the two-piece handle lock (1) and pull the handle in the direction indicated (2). Pull out the
power supply module (3).
Installing a Power Supply
1.
Insert a replacement unit into the empty power bay with the handle to the left.
WARNING:This left/right orientation depends on the power supply's top or bottom location. If you inadvertently
put a power supply upside down in the lower slots, it can be VERY difficult to remove the power supply.
2.
Push unit all the way in until it is firmly seated.
3.
Push the handle back into the closed position until it clicks into the locked position.
4.
Move the locking clip away from the socket and reconnect the power cord.
32
Chapter 6