Table of Contents
Advertisement
Normally, if the printer is in not working properly, the "READY" LED blinks
continuously, and printing and communication between the host and printer
stops.
LED and LCD Diagnosis
Blinking LEDs indicate a problem. Check the LEDs and the LCD display and
refer to the following solutions:
Media Problems
LED/LCD
READY and MEDIA LEDs
LCD Display
Possible Problems
Mis-detected gap
Media out
Media not installed Install the media roll
Media jam
Note: If problem continues perform a label sensor calibration.
Troubleshooting
Blinking
MEDIA OUT
Solutions
Check the media path
Check the position of the
label sensor
Supply the media roll
Recover the jam
55
Indication
Remarks
For continuous media, check
application and driver, and
select continuous media.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Fastmark 4600 PLUS Series User’s guide and is the answer not in the manual?
Questions and answers