Appendix B: Stand-Alone Keyboard And Barcode Reader; Keyboard; Form Control Functions - AMT Datasouth Fastmark 4600 PLUS Series User’s guide User Manual

Appendix B: Stand-alone Keyboard and Barcode Reader

This appendix covers stand-alone operation with keyboard or barcode reader.

Keyboard

To use the printer in stand-alone operation with a keyboard follow the procedure
described below:
1. Make a form for the keyboard. (The form should include "ZS" command to
store to flash memory. Refer to the following command sample.)
2. Turn on the printer; download the form from PC to printer.
3. Turn off the printer.
4. Connect the keyboard to the keyboard interface.
5. Turn on the printer.
6. Check LCD for instructions of each data string/ label count/ copies; type to
input data accordingly.

Form Control Functions

Key
Esc Enter or exit from keyboard mode
Backspace Delete the last typed character
F1 Next form if more than one form exists
Enter - Select the form
- End of typed data
Function
76