Typical Set-Up Control Panel Features - AMT Datasouth Fastmark 4600 PLUS Series User’s guide User Manual

Typical Set-up Control Panel Features

models)
Feature Item
PRINT MODE
MAC ADDRESS
DEFAULT GATEWAY
SUBNET MASK
IP ADDRESS
DHCP
CLEAR FLASH
LENGTH (RS232)
PARITY (RS232)
BAUD RATE
TRIM DARKNESS
ABS DARKNESS
PRESENT DISTANCE
MEDIA SENSOR TYPE
COUNTING
PEELER INSTALLED
CUTTER INSTALLED
RECOVER PRINT
TPH VERT. OFFSET
CUT PEEL OFFSET
AUTO CALIBR MODE
Notes:
1. To verify that a feature has been properly changed cycle power on the printer.
2. Make sure the settings you desire has an * character by the value.
Value
Direct Thermal or Thermal Mode
####-####-####
###.###.###.###
###.###.###.###
###.###.###.###
Enabled or Disabled
Yes or No
7 Data Bits or 8 Data Bits
None Odd or Even
9600 / 115200 / 57600 / 38400 / 19200
9600 / 4800 / 2400 / 1200 / 600
-030 ~ +030
000~030
000~040
Gap or Black Bar
Up or Down
Yes or No
Yes or No
Enabled or Disabled
-003 ~ +003
-015 ~ +050
Mode 1 ~ 4
37
(features may differ among
Factory Default
Direct Thermal
Printer Specific
Printer Specific
Printer Specific
Client Determined
Disabled
No
8 Data Bits
None
9600
+000
016
021
Black Bar
Down
No
No
Disabled
+000
+000
Mode 1