AMT Datasouth Fastmark 4600 PLUS Series User’s guide User Manual page 29

2. Return the outside media guide, close the bracket, and hook the head
latch. (Figure 17)
17
81
1
Head
Latch
3. Close the top access door and turn on the printer or press the FEED
button if the printer is already on. The printer will then feed the labels
through the cutter automatically. (Figure 18)
Note: The FEED button does not make the printer cut. For cutting to occur when the
panel setting is properly enabled.
Bracket
Cutter
29
Outside Media Guide
18