D-Link DGS-3024 - Switch Manual page 113

Figure 8- 11. Add a Server Host to Server Group (XTACACS) window.
To add an Authentication Server Host to the list, enter its IP address in the IP Address field, choose the protocol associated with
the IP address of the Authentication Server Host and click Add to add this Authentication Server Host to the group.
To add a server group other than the ones listed, click the add button, revealing the following window to configure.
Figure 8- 12. Authentication Server Group Table Add Settings window
Enter a group name of up to 15 characters into the Group Name field and click Apply. The entry should appear in the
Authentication Server Group Settings window.
DGS-3024 Gigabit Ethernet Switch Manual
NOTE: The user must configure Authentication Server Hosts using the
Authentication Server Hosts window before adding hosts to the list.
Authentication Server Hosts must be configured for their specific protocol
on a remote centralized server before this function can work properly.
NOTE: The three built in server groups can only have server hosts
running the same TACACS daemon. TACACS/XTACACS/TACACS+
protocols are separate entities and are not compatible with each other.
99