Show Fdb; To Display The Aging Time - D-Link DES-3026 - Switch Reference Manual

show fdb

Purpose
Syntax
Description
Parameters
Restrictions

To display the aging time:

DES-3026:4#show fdb aging_time
Command: show fdb aging_time
Unicast MAC Address Aging Time = 300
DES-3026:4#
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to display the current unicast MAC address forwarding
database.
show fdb {port <port> | vlan <vlan_name 32> | mac_address
<macaddr> | static | aging_time}
This command will display the current contents of the Switch's
forwarding database.
port <port> − The port number corresponding to the MAC destination
address. The Switch will always forward traffic to the specified
device through this port.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address by which the forwarding table will
be viewed.
static − Displays the static MAC address entries.
aging_time − Displays the aging time for the MAC address
forwarding database.
None.
89