Example usage:
To configure STP with path cost 19, priority 15, and state enabled for ports 1-5.
DES-3026:4#config stp ports 1-5 cost 19 priority 15 state enabled
Command: config stp ports 1-5 cost 19 priority 15 state enabled
Success.
DES-3026:4#
enable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable STP, globally, on the Switch:
disable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable STP on the Switch:
DES-3026:4#disable stp
Command: disable stp
Success.
DES-3026:4#
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to globally enable STP on the Switch.
enable stp
This command allows the Spanning Tree Protocol to be globally
enabled on the Switch.
None.
Only administrator-level users can issue this command.
DES-3026:4#enable stp
Command: enable stp
Success.
DES-3026:4#
Used to globally disable STP on the Switch.
disable stp
This command allows the Spanning Tree Protocol to be globally
disabled on the Switch.
None.
Only administrator-level users can issue this command.
77