Show Log; Enable Syslog - D-Link DES-3026 - Switch Reference Manual

show log

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch history log:
DES-3026:4#show log index 1-4
Command: show log index 1-4
Index Time
----- ----------
4 2005/12/22 03:03:58
3 2005/12/22 03:02:58
2 2005/12/22 03:01:28
1 2005/12/22 03:00:01
DES-3026:4#

enable syslog

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the syslog function on the Switch:
DES-3026:4#enable syslog
Command: enable syslog
Success.
DES-3026:4#
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to display the Switch history log.
show log {index <value_list X-Y>}
This command will display the contents of the Switch's history log.
index <value_list X-Y> − Enter a value that corresponds to an entry
made in the log. Multiple entries may be made in the form of x-y, or
from a lower number entry to the higher number entry in the log. The
smallest number (and therefore the earlier entry) will be first.
None.
Log Text
---------------------------------------------------------------
Successful login through Console (Username: Anonymous,
IP:0.0.0.0, MAC:00-00-00-00-00-00)
Logout through Console (Username: Anonymous, IP:0.0.0.0,
MAC:00-00-00-00-00-00)
Successful login through Console (Username: Anonymous,
IP:0.0.0.0, MAC:00-00-00-00-00-00)
Logout through Console (Username: Anonymous, IP:0.0.0.0,
MAC:00-00-00-00-00-00)
Used to enable the system log to be sent to a remote host.
enable syslog
The enable syslog command enables the system log to be sent to a
remote host.
None.
Only administrator-level users can issue this command.
64