Create Fdb; To Create A Unicast Mac Fdb Entry - D-Link DES-3026 - Switch Reference Manual

create fdb

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To create a unicast MAC FDB entry:

DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to create a static entry to the unicast MAC address forwarding
table (database)
create fdb <vlan_name 32> <macaddr> port <port>
This command will make an entry into the Switch's unicast MAC
address forwarding database.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address that will be added to the forwarding
table.
port <port> − The port number corresponding to the MAC destination
address. The Switch will always forward traffic to the specified
device through this port.
Only administrator-level users can issue this command.
DES-3026:4#create fdb default 00-00-00-00-01-02 port 2
Command: create fdb default 00-00-00-00-01-02 port 2
Success.
DES-3026:4#
82