Config Snmp System_Name - D-Link DES-3026 - Switch Reference Manual

config snmp system_name

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch name for "
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to configure the name for the Switch.
config snmp system_name {<sw_name>}
The config snmp system_name command configures the name
of the Switch.
<sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Only administrator-level users can issue this command.
DES-3026 Switch"
DES-3026:4#config snmp system_name DES-3026 Switch
Command: config snmp system_name DES-3026 Switch
Success.
DES-3026:4#
:
48