Interfaces
Network
interfaces
Management
interfaces
Power Supply Regulatory Compliance
This section lists regulatory standards for the
following CoreBuilder 9000 Enterprise Switch power
supplies:
820-watt AC for the 8-slot chassis and 16-slot
chassis
930-watt AC for the 7-slot chassis
–48-volt DC for the 7-slot chassis, 8-slot chassis,
and 16-slot chassis
622 Mbps OC-12c/STM-4
155 Mbps OC-3c/STM-1
45 Mbps DS-3: BNC
34 Mbps E3: BNC
2.047 Mbps E1/nxE1 (IMA): RJ-48-c
1.54 Mbps T1/nxT1 (IMA): RJ-48-c
10/100BASE-TX
100BASE-FX
1000BASE-SX
10/100BASE-T RJ-45 Fast Ethernet
RS-232 (DB-9) serial port
Power Supply Regulatory Compliance
820-watt and 930-watt AC Power Supply
Safety
Low Voltage
Directive
–48-volt DC Power Supply
Safety
Low Voltage
Directive
CSA 22.2 No. 950
UL1950
TUV GS mark
IEC950, CB Certificate
EN60950, with amendments
For products declaring LVD
compliance on the Declaration of
Conformity
This equipment was tested and
found to conform to the Council
Directive 72/23/EEC for safety of
electrical equipment. Conformity
with this directive is based upon
compliance with the safety standard.
CSA 22.2 No. 950-95
UL1950
TUV GS mark
IEC950, CB Certificate
EN60950, with amendments
AUSTEL technical Standard, 001/AS
3260
For products declaring LVD
compliance on the Declaration of
Conformity
This equipment was tested and
found to conform to the Council
Directive 72/23/EEC for safety of
electrical equipment. Conformity
with this directive is based upon
compliance with the safety standard.
95
Need help?
Do you have a question about the 3CB9E7 - CoreBuilder 9000 Chassis Switch and is the answer not in the manual?
Questions and answers