Table of Contents
Advertisement
EMC Directive
Emissions:
Immunity:
*EMC Directive Compliance
This equipment was tested and found to conform to the Council
Directive 72/23/EEC for safety of electrical equipment. Confor-
mity with this directive is based upon compliance with the fol-
lowing harmonized standards:
EN55022-Limits and Methods of Measurement of Radio Inter-
ference
EN50082-1 Electromagnetic Compatibility Generic Immunity
Standard: Residential, Commercial, and Light Industry
Interfaces
Network
Interfaces
Management
interfaces
EMC EN55022
EN61000-3, 2
EN50082-1
45 Mbps DS-3: BNC
34 Mbps E3: BNC
2.047 Mbps E1/nxE1 (IMA): RJ-48-c
1.54 Mbps T1/nxT1 (IMA): RJ-48-c
10/100BASE-TX
100BASE-FX
1000BASE-SX
10/100BASE-T RJ-45 Fast Ethernet
RS-232 (DB-9) serial port
8-slot Chassis Specifications
This section contains specifications for the
CoreBuilder 9000 Enterprise Switch 8-slot chassis.
Physical
Height
57.6 cm
Width
48.3 cm
44.4 cm
Depth
51.2 cm
54.1 cm
Weight
51.2 kg
71.7 kg
Mounting
Tabletop, shelf, or 19-inch rack mount
Environmental
Operating
1
temperature
Operating humidity
Storage temperature
Storage humidity
1
Switch operating temperature is the temperature of the envi-
ronment in which the Switch is installed.
2
Ambient air is room air (more specifically, the air drawn into
the Switch by installed fans to cool installed Switch compo-
nents). Ambient air temperature is not measured by chassis
temperature sensors.
8-slot Chassis Specifications
22.7 inches (13 Rack Units)
19 inches (including rack-mount
flanges)
17.5 inches (not including
rack-mount flanges)
20.2 inches (from rack mount)
21.3 inches (with fan trays)
112.9 pounds (chassis and
backplane)
158 pounds (fully loaded)
°
°
2
0
C to 50
C ambient
°
°
(32
F to 122
F)
10% to 90%, noncondensing
°
°
-40
C to 66
C
(-40
°
F to 151
°
F)
10% to 90%, noncondensing
91
Advertisement
Table of Contents
Need help?
Do you have a question about the 3CB9E7 - CoreBuilder 9000 Chassis Switch and is the answer not in the manual?
Questions and answers