Table of Contents
Advertisement
CAUTION: If the resistance is too great, the fan tray
connector and backplane connector may not be
aligned properly. Do not force the fan tray inward or
you can damage the connectors. If necessary, remove
and reinsert the fan tray, ensuring that the connectors
are properly aligned.
6
Verify that the fan tray is flush with the front of the
chassis. If the fan tray and the chassis are not aligned,
remove the fan tray and reseat it.
Using a flat-blade screwdriver, tighten the two
7
spring-loaded screws to secure the fan tray to the
front of the chassis (Figure 35).
The fans begin rotating the moment that you power
on the Switch.
Visually inspect all installed fans to verify that each is
8
turning without interruption. If a fan is not running,
shut the power off and remove and reinsert the fan
tray.
Removing and Replacing a Fan Tray
73
Advertisement
Table of Contents
