3Com 3CB9E7 - CoreBuilder 9000 Chassis Switch Getting Started Manual page 57

Table 9 Tasks to Perform After You Power On the Switch
Task Description
Configure the To configure the EME, set:
Enterprise
Terminal settings
Management
Time and date
Engine
Device (Contact, Diagnostics, Location,
and Name)
SNMP parameters to enable network
access
Mastership priority, if you have two
EMEs
Connect to a To configure and monitor your Switch,
terminal or a connect a PC, terminal, or modem to the
modem EME console port.
You can manage your Switch locally
through a terminal connection or
remotely using a Telnet or modem con-
nection.
Perform initial Initially you access the Switch through the
management RS-232 port.
access
With network access, you can manage
the CoreBuilder
from a remote terminal or SNMP
manager.
®
9000 Enterprise Switch
Where to Go from Here 57