3Com 3CB9E7 - CoreBuilder 9000 Chassis Switch Getting Started Manual page 78

78 C 8: M
HAPTER AINTENANCE FOR THE
Figure 37 CoreBuilder 9000 8-slot Chassis Power Supply
Location with a 820-watt Power Supply Installed
R
1 2 3 4 5 6 7
8-SL C
OT HASSIS AND THE
Power supply
slot 3
®
CoreBuilder 9000
8 9 10
ON
Power supply
(in slot 1)
Power supply
slot 2
16-S C
LOT HASSIS
To remove an 820-watt power supply from a
CoreBuilder 9000 8-slot chassis or 16-slot chassis,
follow these steps:
For the 16-slot chassis only, to gain access to the
1
power supply slots, remove the plastic air grille bezel
that covers the power supply bay (Figure 38).
With both hands, hold each side of the bezel and
a
push down on the top of the bezel with your
thumbs.
Gently snap the bottom of the bezel off and then
b
the top.
Figure 38 Removing the Plastic Air Grille Bezel That Covers
the Power Supply Slots
Power supply
plastic air grille bezel