Replacing The Fan Tray In A 7-Slot Chassis - 3Com 3CB9E7 - CoreBuilder 9000 Chassis Switch Getting Started Manual

72 C 7: M
HAPTER AINTENANCE FOR THE

Replacing the Fan Tray in a 7-slot Chassis

You can install a fan tray in your CoreBuilder 9000
7-slot chassis while the power is still on (this is called
hot swapping).
To install a new fan tray:
Grasp the handle on the fan tray and then face the
1
front of the chassis.
Locate the connector on the fan tray (Figure 34).
2
Figure 34 Connector on the Fan Tray
Handle
7-S C
LOT HASSIS
Fan tray
connector
Slide the fan tray into the chassis (Figure 35).
3
Figure 35 Installing the Fan Tray into the 7-slot Chassis Using
the Handle
Spring-loaded
screw
Fan tray
handle
Spring-loaded
screw
Align the fan tray connector and the backplane
4
connector.
Gently push the fan tray inward until the connectors
5
engage.
You feel a slight resistance as the connectors engage.
R