Advantech AIMB-275 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. AIMB-275
  6. User manual

Advantech AIMB-275 User Manual

Intel core i7/i5/i3/pentium/ celeron lga1151 mini-itx with crt/lvds/hdmi/dp++, 2 com, dual lan, pcie x16, 12-24 v dcin
Hide thumbs
Table of Contents

Advertisement

Quick Links

Manual
ADVANTECH
AIMB-275
The information contained in this document has been carefully researched and is, to the best
of our knowledge, accurate. However, we assume no liability for any product failures or
damages, immediate or consequential, resulting from the use of the information provided
herein. Our products are not intended for use in systems in which failures of product could
result in personal injury. All trademarks mentioned herein are property of their respective
owners. All specifications are subject to change without notice.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AIMB-275 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech AIMB-275

Summary of Contents for Advantech AIMB-275

  • Page 1 Manual ADVANTECH AIMB-275 The information contained in this document has been carefully researched and is, to the best of our knowledge, accurate. However, we assume no liability for any product failures or damages, immediate or consequential, resulting from the use of the information provided herein.
  • Page 2 User Manual AIMB-275 Intel® Core™ i7/i5/i3/Pentium/ Celeron LGA1151 Mini-ITX with CRT/LVDS/HDMI/DP++, 2 COM, Dual LAN, PCIe x16, 12 ~ 24 V DCIN...
  • Page 3 The documentation and the software included with this product are copyrighted 2016 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.
  • Page 4 Advantech has come to be known. Your satisfaction is our primary concern. Here is a guide to Advantech’s cus- tomer services.

  • Page 5: Declaration Of Conformity

    Caution! There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the man- ufacturer. Discard used batteries according to the manufacturer's instructions. AIMB-275 User Manual...

  • Page 6: Ordering Information

    1 (2.0) 6 / 4 1 (F/S) 00A1E AIMB- 275VG- Q170 1 (1.2) 4 / 4 1 (F/S) 00A1E AIMB- 275L- H110 1 (1.2) 4 / 4 1 (F/S) 00A1E *() BOM options available on MP version AIMB-275 User Manual...
  • Page 7 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
  • Page 8 It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the AIMB-275, check it for signs of ship- ping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or it fails to meet the specifications, notify our service department or your local sales representative immediately.
  • Page 9 AIMB-275 User Manual viii...

  • Page 10: Table Of Contents

    Figure 1.1 Jumper and Connector Location (Top Side)....5 Figure 1.2 Jumper and Connector Location (Bottom Side) ..6 AIMB-275 Board Diagram ................. 7 Figure 1.3 AIMB-275 Board Diagram .......... 7 Safety Precautions ..................8 Jumper Settings ..................8 1.8.1 How to Set Jumpers..............
  • Page 11 Save & Exit Configuration............85 Chapter Software Introduction & Service ..87 Introduction ..................... 88 Value-Added Software Services ............. 88 4.2.1 Software API................88 4.2.2 Software Utility................90 Chapter Chipset Software Installation Utility Before You Begin..................92 Introduction ..................... 92 AIMB-275 User Manual...
  • Page 12 Next Generation Form Factor (M.2_1) ..........124 A.33 M.2 Screw _42*22mm & 42*30mm (M.2_2) M.2 Screw_80*22mm (M.2_3) .............. 125 A.34 LVDS VESA, JEIDA format selection pin header (JLVDS_VCON1)..125 A.35 Case open selection pin header (JCASEOP_SW1)......126 A.36 Case-Open Detect Connector (JCASE1)..........126 AIMB-275 User Manual...
  • Page 13 A.37 Watchdog Timer Output and OBS Beep (JWDT1+JOBS1) ....126 A.38 SATA Power connector (JSATAPWR1)..........127 AIMB-275 User Manual...

  • Page 14: Chapter 1 General Information

    Chapter General Information...

  • Page 15: Introduction

    Introduction AIMB-275 is designed with the Intel® Q170 PCH for industrial applications that require both performance computing and enhanced power management capabilities. The motherboard supports Intel desktop Corei7/i5/i3/Pentium/Celeron processor up to 8 MB L3 cache and 2 DDR4 2133MHz SO-DIMM, up to 32 GB. A rich I/O connec- tivity of 2 serial ports, 10 USB, dual GbE LAN, 3 SATA, 1 miniPCIe and 1 NGFF (M.2_B Key) Connector.

  • Page 16: Graphics

    Intel Core i7-6700 3.4GHz, 2pcs 16GB DDR4 2133MHz SDRAM, 24V @4.45A Measure the maximum current value which system under maximum load (CPU: Top speed, RAM & Graphic: Full loading)  Board size: 170 mm x 170 mm (6.69" x 6.69")  Board weight: 0.365 kg AIMB-275 User Manual...

  • Page 17: Jumpers And Connectors

    Jumpers and Connectors Connectors on the AIMB-275 motherboard link it to devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application. The tables below list the function of each of the board jumpers and connectors. Later sections in this chapter give instructions on setting jumpers.

  • Page 18: Board Layout: Jumper And Connector Locations

    JLVDS1 LVDS SPDIF1 SATA_PWR1 SATA_PWR2 SYSFAN2 JFP1 INV1 MINIPCIE_1 JWDT1+JBOS1 COM2 PCIex16_1 PSON1 ATX_5VSB1 KSMB1 LPC1 SATA1 GPIO1 SATA2/3 DIMMA1 JFP2 DIMMB1 SPI1 USB78 USB910 SPI_CN1 CPUFAN1 USB56 SYSFAN1 Figure 1.1 Jumper and Connector Location (Top Side) AIMB-275 User Manual...

  • Page 19: Figure 1.2 Jumper And Connector Location (Bottom Side)

    M.2_3 (22*80mm screw hole) CPU0_BACKPLATE1 M.2_2 22*42 / 30*42 mm Screw hole.) M.2_1 Figure 1.2 Jumper and Connector Location (Bottom Side) AIMB-275 User Manual...

  • Page 20: Aimb-275 Board Diagram

    USB 2.0 SATA/ PCIex2 M.2 (B Key) 6 USB3.0 Ports USB 3.0 Super IO Nuvuton 6776D Audio Codec Infineon TPM 1.2/2.0 BIOS 1 RS-232, Realtek ALC892 (Optional) 1 RS-232/422/485, PS/2, WDT, 8 GPIO Figure 1.3 AIMB-275 Board Diagram AIMB-275 User Manual...

  • Page 21: Safety Precautions

    1, 2, and 3. In this case you connect either pins 1 and 2, or 2 and 3. A pair of needle-nose pliers may be useful when set- ting jumpers. AIMB-275 User Manual...

  • Page 22: Cmos Clear (Cmos1)

    1.8.2 CMOS Clear (CMOS1) The AIMB-275 motherboard contains a jumper that can erase CMOS data and reset the system BIOS information. Normally this jumper should be set with pins 1-2 closed. If you want to reset the CMOS data, set CMOS1 to 2-3 closed for just a few seconds, and then move the jumper back to 1-2 closed.

  • Page 23: Watchdog Timer Output And Obs Beep (Jwdt1+Jobs1)

    (2 and 3)+(4 and 5) Watchdog Timer Disable (1-2) OBS BEEP(4-5) (Default) (1 and 2)+(4 and 5) 1.8.6 ATX/AT Mode Selection (PSON1) Table 1.7: ATX/AT Mode Selection (PSON1) Function Jumper Setting AT Mode 1-2 closed ATX Mode (Default) 2-3 closed AIMB-275 User Manual...

  • Page 24: Lvds Panel Voltage Selection (Jlvds1)

    5 and 6 System Memory AIMB-275 has two sockets for a 260 pins DDR4 SO-DIMM. This socket uses a 1.2 V unbuffered double data rate synchronous DRAM (DDR SDRAM). DRAM is available in capacities of 4GB, 8GB and 16GB. The sockets can be filled in any combination with SODIMMs of any size, giving a total memory size between 4GB, 8GB, 16GB, and up to max 32GB.

  • Page 25: Memory Installation Procedures

    1.11 Cache Memory The AIMB-275 supports a CPU with one of the following built-in full speed Last Level Cache: 8MB for Intel Core i7-6700 / i7-6700TE 6MB for Intel Core i5-6500 / i5-6500TE...

  • Page 26: Chapter 2 Connecting Peripherals

    Chapter Connecting Peripherals...

  • Page 27: Introduction

    USB Ports (LAN1_USB12/LAN2_USB34/USB56/ USB78/USB910) The AIMB-275 provides up to ten USB ports. Four USB3.0 on the rear side and six pin header on the board. The USB interface complies with USB Specification Rev. 2.0 and Rev. 3.0 supporting transmission rates up to 625 Mbps and is fuse protected.

  • Page 28: Vga Connector(Vga1)

    VGA Connector(VGA1) The AIMB-275 includes VGA interface that can drive conventional VGA displays. VGA1 is a standard 15-pin D-SUB connector commonly used for VGA. AIMB-275 User Manual...

  • Page 29: Serial Ports (Com1~Com2)

    COM1 COM2 AIMB-275 supports two serial ports, COM1 supports RS-232 function, COM2 sup- ports RS-232/422/485 function by BIOS selection. These ports can connect to serial devices, such as a mouse or a printer, or to a communications network. The IRQ and address ranges for both ports are fixed.

  • Page 30: Ps/2 Keyboard And Mouse Connector (Kbms1)

    KBMS1 On board 6-pin wafer box connector, supports one standard PS/2 keyboard, one standard PS/2 mouse. CPU Fan Connector (CPU_FAN1) If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less. AIMB-275 User Manual...

  • Page 31: System Fan Connector (Sysfan1/2)

    System FAN Connector (SYSFAN1/2) If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less. AIMB-275 User Manual...

  • Page 32: Power Switch/Hdd Led/Smbus/Speaker Pin Header (Jfp1) & Power

    External speaker (JFP1/SPEAKER) JFP1/SPEAKER is a 4-pin connector for an external speaker. If there is no external speaker, the AIMB-275 provides an onboard buzzer as an alternative. To enable the buzzer, set pins 7 & 10 as closed. AIMB-275 User Manual...

  • Page 33: Power Led And Keyboard Lock Connector

    System On Off ( Windows 7) System Off Slow Flashes (Window 8) System Suspend Fast Flashes (S3) System Suspend Slow Flashes (S4) Display Port and HDMI Common Connector (DP- HDMI1) AIMB-275 User Manual...

  • Page 34: Dc Input Phoenix Connector (Dcin1)

    2.10 DC Input Phoenix Connector (DCIN1) 2.11 SATA Signal Connector (SATA1 ~ SATA3) SATA1/2/3 AIMB-275 features a high performance Serial ATA III interface (up to 600 MB/s) which eases hard drive cabling with thin, space-saving cables. AIMB-275 User Manual...

  • Page 35: Sata_Pwr1/2

    Connect this connector with the front panel audio I/O module cable. AUDIO1 FPAUD1 Note! For motherboards with the optional HD Audio feature, we recommend that you connect a high-definition front panel audio module to this con- nector to take advantage of the motherboard’s high definition audio capability. AIMB-275 User Manual...

  • Page 36: Pci-E X16 Slot (Pciex16_1)

    2.14 PCI-E x16 Slot (PCIEX16_1) AIMB-275 provides 1 x PCI express x16 slot. 2.15 LVDS Panel Connector (LVDS1) AIMB-275 User Manual...

  • Page 37: Lvds Backlight Inverter Power Connector (Inv1)

    2.16 LVDS Backlight Inverter Power Connector (INV1)  Note! Signal Description Signal Signal Description Vadj=0.75 V (Recommended: 4.7 K, 1/16 W) ENBKL LCD backlight ON/OFF control signal AIMB-275 User Manual...

  • Page 38: Embedded Display Port Connector (Edp1), Bom Optional

    2.17 Embedded Display Port Connector (EDP1), BOM optional 2.18 MINIPCIE and mSATA Connector (MINIPCIE1) AIMB-275 User Manual...

  • Page 39: Front Next Generation Form Factor (M.2_1)

    2.19 Front Next Generation Form Factor (M.2_1) 2.20 HD Digital Audio Interface (SPDIF1) AIMB-275 User Manual...

  • Page 40: Audio Amplifier Output Connector (Amp1), Bom Optional

    2.21 Audio Amplifier Output Connector (AMP1), BOM optional 2.22 General Purpose I/O Pin Header (GPIO1) AIMB-275 User Manual...

  • Page 41: Spi Bios Flash Socket (Spi1)

    2.23 SPI BIOS Flash Socket (SPI1) 2.24 SPI Programming Pin Header (SPI_CN1) The SPI flash card pin header may be used to flash BIOS if the AIMB-275 cannot power on. AIMB-275 User Manual...

  • Page 42: Low Pin Count Header (Lpc1)

    2.25 Low Pin Count Header (LPC1) 2.26 Case-Open Detect Connector (JCASE1) AIMB-275 User Manual...

  • Page 43: Atx 12V Power Supply Connector (Atx12V1) & Atx Power Supply Connector (Atxpwr1)

    2.27 ATX 12V Power Supply Connector (ATX12V1) & ATX Power Supply Connector (ATXPWR1) ATX12V1 ATX_5VSB1 2.28 Battery Holder (BAT1) BAT1 AIMB-275 User Manual...

  • Page 44: Cpu Socket (Cpu1)

    2.29 CPU Socket (CPU1) 2.30 DDR4 SO-DIMM Socket (DIMMA1, DIMMB1) AIMB-275 User Manual...
  • Page 45 AIMB-275 User Manual...

  • Page 46: Bios Operation

    Chapter BIOS Operation...

  • Page 47: Introduction

    AIMB-275 setup screens. BIOS Setup The AIMB-275 Series system has AMI BIOS built in, with a CMOS SETUP utility that allows users to configure required settings or to activate certain system features.The CMOS SETUP saves the configuration in the CMOS RAM of the motherboard. When the power is turned off, the battery on the board supplies the necessary power to pre- serve the CMOS RAM.When the power is turned on, press the <Del>...

  • Page 48: Advanced Bios Features

    3.2.2 Advanced BIOS Features Select the Advanced tab from the AIMB-275 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
  • Page 49 NIC Configuration  Link Speed [ Auto Negotiated ] The value specifies the port speed used for the selected boot protocol.  Wake on LAN [Enable] Enables or Disables Wake on LAN (i211) function. AIMB-275 User Manual...
  • Page 50 3.2.2.2 Intel® Ethernet Connection (H) I219-LM AIMB-275 User Manual...
  • Page 51 Trusted Computing To enable/disable TPM (TPM 1.2) set up in BIOS. TPM (Trusted Platform Module) is a secure key generator and key cache management component, enables protected storage of encryption keys and authentication credentials for enhanced security capabilities. AIMB-275 User Manual...
  • Page 52  Security Device Support [ Enabled ] Enable or Disable BIOS support for security device. Note! TCG EFI Protocol and INT1A interface will not be available. AIMB-275 User Manual...
  • Page 53  TPM Enabled State [ Enabled ] Note! TPM function requests Hardware design supported and BIOS enabled in parallel. 3.2.2.4 ACPI Settings AIMB-275 User Manual...
  • Page 54 ACPI Sleep State [ S3 (Suspend to RAM) ] Select ACPI sleep state the system will enter when the SUSPEND button is pressed.  Lock Legacy Resources [ Disabled ] S3 Video Repost [ Disabled ] 3.2.2.5 AMT Configuration AIMB-275 User Manual...
  • Page 55 When set to [Enabled], the Watchdog timer will monitor the time taken for each task performed by a software or hardware. – OS Timer [ 0 ] Set OS watchdog timer – BIOS Timer [ 0] Set BIOS watchdog timer. AIMB-275 User Manual...
  • Page 56 3.2.2.6 PCH-FW Configuration  ME Unconfig on RTC Clear Status [ Enabled ]  ME State [ Enabled ] AIMB-275 User Manual...
  • Page 57 Firmware update Configuration  ME FW Image Re-Flash [ Disabled ] 3.2.2.7 Super IO Configuration AIMB-275 User Manual...
  • Page 58  Serial Port 1 Configuration  Serial Port [ Enabled ]  Device Settings IO=3F8h; IRQ = 4  Change Settings [ Auto ] AIMB-275 User Manual...
  • Page 59 Serial Port 2 Configuration  Serial Port [ Enabled ]  Device Settings IO=2F8h; IRQ = 3  Change Settings [ Auto ]  Device Mode [ RS232 ] AIMB-275 User Manual...
  • Page 60 Digital I/O Configuration 3.2.2.8 H/W Monitor AIMB-275 User Manual...
  • Page 61 ACPI Shutdown Temperature [ Disabled ] Use this to set the ACPI shutdown temperature threshold. When the system reaches the shutdown temperature, it will be automatically shut down by ACPI OS to protect the system from overheating damage. AIMB-275 User Manual...
  • Page 62 Smart Fan Mode Configuration 3.2.2.9 S5 RTC Wake Settings The item allows you enable or disable system wake up on alarm event. AIMB-275 User Manual...
  • Page 63  Wake system from S5 [ Disabled ] Enable or disable system wake on alarm event. – Select FixedTime: System will wake on the specific hr::min::sec. 3.2.2.10 Serial Port Console Redirection AIMB-275 User Manual...
  • Page 64  Console Redirection [ Disabled ] Enable or disable the console redirection feature 3.2.2.11 CPU Configuration AIMB-275 User Manual...
  • Page 65  CPU Configuration The item shows you CPU specification and feature; the content could be differ- ent by the different CPU. AIMB-275 User Manual...
  • Page 66  Power Limit 3 Settings  Power Limit 3 Override [ Disabled ] If this option is enabled, BIOS will leave the default values for Power Limit 3 and Power Limit 3 Power Window. AIMB-275 User Manual...
  • Page 67  Power Limit 4 Settings  Power Limit 4 Override [ Disabled ] If this option is enabled, BIOS will leave the default values for Power Limit 4. CPU Thermal Configuration AIMB-275 User Manual...
  • Page 68 Enable: ACPI thermal management use DTS SMM mechanism to obtain CPU temperature values. Out of Spec: ACPI thermal management use EC reported temperature values and DTS SMM mechanism is used to handle Out of Spec.  ACPI 3.0 T-States [ Disabled ] 3.2.2.12 Intel TXT Information AIMB-275 User Manual...
  • Page 69 3.2.2.13 Platform Misc Configuration AIMB-275 User Manual...
  • Page 70  Native PCIE Enable [ Enabled ] Note! PCI Express Native support is only available in Vista.  Native ASPM [ Auto ] BOAT ACPI Table Support [ Disabled ]  PCI Delay Optimization [ Disabled ] AIMB-275 User Manual...
  • Page 71 SATA Configuration  SATA Controllers [ Enabled ]  SATA Mode Selection [ AHCI ]  Aggressive LPM Support [ Enabled ]  Serial ATA Port 1 [ Enabled ]  Serial ATA Port 2 [ Enabled ] AIMB-275 User Manual...
  • Page 72 Serial ATA Port 3 [ Enabled ]  mSATA [ Enabled ]  M.2 [ Enabled ] Note! AIMB-275 M.2 B_Key supports NGFF (Next Generation Form Factor) Storage and 3G device. Not compatible with M.2 WIFI, Bluetooth device. AIMB-275 User Manual...
  • Page 73 Software Feature Mask Configuration 3.2.2.15 Network Stack Configuration AIMB-275 User Manual...
  • Page 74  Network Stack [ Disabled ] Enable / Disable UEFI Network Stack 3.2.2.16 CSM Configuration AIMB-275 User Manual...
  • Page 75 Re-install your OS as UEFI Mode Change all of settings above as " Legacy"  Boot option filter  Legacy Only  Network  Legacy  Storage  Legacy Video  Legacy  Other PCI devices  Legacy  AIMB-275 User Manual...
  • Page 76 3.2.2.17 NVMe Configuration AIMB-275 User Manual...
  • Page 77  Legacy USB Support [ Enabled ] Enables support for legacy USB. Auto option disables legacy support if no USB devices are connected.  XHCI Hand-off [ Enabled ] USB Mass Storage Driver Support [ Enabled ] AIMB-275 User Manual...

  • Page 78: Chipset Configuration Setting

    Users can display a Chipset Setup option by highlighting it using the <Arrow> keys. All Chipset Setup options are described in this section. The Chipset Setup screens are shown below. The sub menus are described on the following pages. AIMB-275 User Manual...
  • Page 79 3.2.3.1 System Agent (SA) Configuration  VT-d [ Enabled ] Disable or enable VT-d capability.  Above 4GB MMIO BIOS assigment [ Disabled ] Graphics Configuration AIMB-275 User Manual...
  • Page 80 VDD Enable [ Enabled ]  PM Support [ Enabled ]  PAVP Enable [ Enabled ]  Cdynmax Clamping Enable [ Enabled ]  Cd Clock Frequency [ 675 Mhz ] LCD Control  LVDS Panel Type [ Disabled ] AIMB-275 User Manual...
  • Page 81 DMI/ OPI Configuration  DMI Max Link Speed [ Auto ] Set DMI Speed at Gen1/ Gen2/ Gen3. Gen3 Root Port Press Value for each Lane AIMB-275 User Manual...
  • Page 82 Gen3 Endpoint Preset value for each Lane Gen3 Endpoint Hint value for each Lane AIMB-275 User Manual...
  • Page 83 Gen 3 RxCLTE Control  PEG Port Configuration AIMB-275 User Manual...
  • Page 84 Program PCIe ASPM after OpROM [ Disabled ] Enabled: PCIe ASPM will be programmed after OpROM. Disabled: PCIe ASPM will be programmed before OpROM.  Program Static Phase1 Eq [ Enabled ]  PEG Sampler Calibrate [ Disabled ] AIMB-275 User Manual...
  • Page 85 Gen3 Root Port Preset value for each Lane Gen3 Endpoint Preset value for each Lane AIMB-275 User Manual...
  • Page 86 Gen3 Endpoint Hint value for each Lane Gen3 RxCTLE Control  RxCTLE Override [ Disabled ] AIMB-275 User Manual...
  • Page 87 Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed graphic controller.  Retrain on Fast Fail [ Enabled ]  Memory Remap [ Enabled ]  Fast Boot [ Enabled ] AIMB-275 User Manual...
  • Page 88 GT- Power Management Control  RC6 (Render Standby) [ Enabled ] Check to enable / disable render standby supported. 3.2.3.2 PCH-IO Configuration AIMB-275 User Manual...
  • Page 89 PCIE Wake [ Disabled ] Enable or disable PCIE Wake feature.  Deep Sleep [ Disabled ] Enable or disable the Deep Sleep funciton.  High Precision Timer [ Enbled ]  Start After G3 [ Power Off ] AIMB-275 User Manual...
  • Page 90 DMI Link ASPM Control [ Enabled ] Enable or disable the control of Active State Power Management on SA side of the DMI Link.  Peer Memory Write Enable [ Disabled ]  PCIe-USB Glitch W/A [ Disabled ] AIMB-275 User Manual...
  • Page 91 PCI Express G3 Eq Lanes  Override SW EQ settings [ Disabled ] Mini PCI Express AIMB-275 User Manual...
  • Page 92 PCIe Speed [ Auto ]  [ Enabled ] Enable or disable PCI Express Root Port controller.  ASPM Support [ Auto ]  L1 Substates [ L1.1 & L1.2 ]  PCIe Speed [ Auto ] AIMB-275 User Manual...
  • Page 93 USB Configuration  USB Preconditon [ Disabled ] Note! All of USB 2.0 & 3.0 only supported from 1 XHCI controller. AIMB-275 User Manual...
  • Page 94 BIOS Security Configuration  RTC Lock [ Enabled ] Enable will lock bytes 38h-3Fh in the lower/upper 128 byte bank of RTC RAM.  BIOS Lock [ Enabled ] HD Audio Configuration AIMB-275 User Manual...

  • Page 95: Security Setting

    This item is to control detection of the HD-Audio device. [ Disabled ] = HAD will be unconditionally disabled. [ Enabled ] = HAD will be unconditionally enabled. [ Auto ] = HAD will be enabled if present, disabled otherwise. 3.2.4 Security Setting AIMB-275 User Manual...
  • Page 96 Secure Boot [ Disabled ] Secure Boot can be enabled if the 2 conditions below are met: System is running in user mode with enrolled Platform Key (PK) CSM function is disabled  Secure Boot Mode [ Custom ] Key Management AIMB-275 User Manual...

  • Page 97: Boot Setting

    Quiet Boot [ Disabled ] If this option is set as disabled, the BIOS displays normal POST messages. If set as enabled, an OEM logo is shown instead of POST messages.  Boot Option Priorities Choose boot priority from boot device AIMB-275 User Manual...

  • Page 98: Save & Exit Configuration

    Select Exit Saving Changes from the Exit menu and press <Enter>. The fol- lowing message appears: Save Configuration Changes and Exit Now? [Ok] or [Cancel] Select [Ok] or [Cancel]  Discard Changes and Reset Select this option to quit Setup without making any permanent changes to the system configuration. AIMB-275 User Manual...
  • Page 99 <Enter>.  Save as User Default Save the all current settings as a user default.  Restore User Default Restore all settings to user default values.  Boot Override Shows the boot device types on the system. AIMB-275 User Manual...

  • Page 100: Software Introduction & Service

    Chapter Software Introduction & Service...

  • Page 101: Introduction

    Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft® Windows® embedded technology." We enable Windows® Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (hardware suppliers, system integrators, embedded OS distributors) for projects.
  • Page 102 System Throttling Refers to a series of methods for reducing power consump- tion in computers by lowering the clock frequency. This API allows the user to adjust the clock from 87.5% to 12.5%. AIMB-275 User Manual...

  • Page 103: Software Utility

    The eSOS also provide for remote connection via Telnet server and FTP server so the administrator can attempt to rescue the system. Note: This function requires BIOS cus- tomization. AIMB-275 User Manual...

  • Page 104: Chipset Software Installation Utility

    Chapter Chipset Software Installation Utility...

  • Page 105: Before You Begin

    Before You Begin To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the AIMB-275 are located on Advantech support website: http://support.advantech.com/Support/. The driver on the support website will guide and link you to the utilities and drivers under a Win- dows system.
  • Page 106 AIMB-275 User Manual...
  • Page 107 AIMB-275 User Manual...

  • Page 108: Usb Setup

    Chapter USB Setup...

  • Page 109: Introduction

    If your operation system is Win7, please make sure you insert PS/2 keyboard mouse to install the driver first. Download USB 3.0 driver from website to your computer. Click “ USB 3.0” folder and chose WIN7 or WIN8 for the driver installation. AIMB-275 User Manual...
  • Page 110 AIMB-275 User Manual...
  • Page 111 AIMB-275 User Manual...

  • Page 112: Vga Setup

    Chapter VGA Setup...

  • Page 113: Introduction

    See Chapter 5 for information on installing the CSI util- ity. Download the driver from website on your computer. Navigate to the "Graphics" folder and click "setup.exe" to complete the installation of the drivers for Windows 7, Windows 8 and Windows 10. AIMB-275 User Manual...
  • Page 114 AIMB-275 User Manual...
  • Page 115 AIMB-275 User Manual...

  • Page 116: Lan Configuration

    Chapter LAN Configuration...

  • Page 117: Introduction

    Introduction The AIMB-275 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes (Intel I219LM (LAN1) and I211AT (LAN2)) that offer bandwidth of up to 500 MB/sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at 1000 Mbps.

  • Page 118: Windows® 7/8/10 Driver Setup (Intel I219Lm / I211At)

    Windows® 7/8/10 Driver Setup (Intel I219LM / I211AT) Download the driver from support website on your computer and decompressed the file. Select the "Autorun" then navigate to the directory for your OS. AIMB-275 User Manual...
  • Page 119 AIMB-275 User Manual...

  • Page 120: Appendix A I/O Pin Assignments

    Appendix I/O Pin Assignments...

  • Page 121: Dc Input Phoenix Connector (Dcin1)

    DC input Phoenix Connector (DCIN1) Signal Signal Vcc(12~24v) Vcc(12~24v) COM Port (COM1) Signal Signal DCD# DSR# RTS# CTS# DTR# Video Graphics Array Connector (VGA1) Signal Signal GREEN BLUE VCC_VGA HSYNC VSYNC AIMB-275 User Manual...

  • Page 122: Displayport + High Definition Multimedia Interface (Dp1+Hdmi1)

    DisplayPort + High Definition Multimedia Interface (DP1+HDMI1) Signal Signal HDMI1_Z_D2+ DP1_0+ HDMI1_Z_D2- DP1_0- HDMI1_Z_D1+ DP1_1+ HDMI1_Z_D1- DP1_1- HDMI1_Z_D0+ DP1_2+ HDMI1_Z_D0- DP1_2- HDMI1_Z_CLK+ DP1_3+ HDMI1_Z_CLK- DP1_3- DP1_AUX_EN# HDMI1_SCL DP1_AUX+ HDMI1_SDA DP1_AUX- +V5_HDMI DP1_HPD HDMI1_HPD +V3.3_DP1 AIMB-275 User Manual...

  • Page 123: Rj45+Usb 3.0 Stack Connector (Lan1_Usb12)

    RJ45+USB 3.0 Stack Connector (LAN1_USB12) RJ45+USB 3.0 Stack Connector (LAN2_USB34) RJ45 Signal Signal MDI_0+ MDI_2+ MDI_0- MDI_2- MDI_1+ MDI_3+ MDI_1- MDI_3- Signal Signal RX0- RX1- RX0+ RX1+ TX0- TX1- TX0+ TX1+ AIMB-275 User Manual...

  • Page 124: Hd Analog Audio Interface (Audio1)

    MIC IN LINE OUT LINE IN Audio Amplifier Output Connector (AMP1) Signal Front HD Analog Audio Interface (FPAUD1) Signal Signal MIC IN L MIC IN R FPAUD_DETECT# LINE OUT R SENSE R1 SENSE LINE OUT L SENSE R2 AIMB-275 User Manual...

  • Page 125: Hd Digital Audio Interface (Spdif1)

    PCI-E x16 Slot (PCIEX16_1) Signal Signal +12V PRSNT1# +12V +12V +12V +12V SMB_CLK Reserved SMB_DATA Reserved Reserved +3.3V Reserved Reserved +3.3V +3.3VAUX +3.3V WAKE# PWRGD Reserved REFCLK+ TX0+ REFCLK- TX0- RX0+ Reserved RX0- DETECT# TX1+ CONFIG1 TX1- AIMB-275 User Manual...
  • Page 126 RX2+ RX2- TX3+ TX3- RX3+ Reserved RX3- Reserved CONFIG2 TX4+ Reserved TX4- RX4+ RX4- TX5+ TX5- RX5+ RX5- TX6+ TX6- RX6+ RX6- TX7+ TX7- RX7+ Reserved RX7- TX8+ Reserved TX8- RX8+ RX8- TX9+ TX9- RX9+ RX9- TX10+ AIMB-275 User Manual...

  • Page 127: Smbus Programming Infineon For +Vcore Controller (Jsmb1)

    TX10- RX10+ RX10- TX11+ TX11- RX11+ RX11- TX12+ TX12- RX12+ RX12- TX13+ TX13- RX13+ RX13- TX14+ TX14- RX14+ RX14- TX15+ TX15- RX15+ Reserved RX15- Reserved A.11 SMBUS Programming INFINEON for +Vcore Controller (JSMB1) Signal INF_SMBCLK INF_SMBDATA AIMB-275 User Manual...

  • Page 128: Cpu Fan Power Connector (Cpufan1)

    A.12 CPU FAN Power Connector (CPUFAN1) Signal +12V DETECT PWM IN A.13 SYSTEM FAN Power Connector (SYSFAN2) Signal +12V DETECT PWM IN A.14 SPI Programming Pin Header (SPI_CN1) Signal Signal +3.3V MISO MOSI AIMB-275 User Manual...

  • Page 129: Usb 3.0 Connector (Usb56)

    A.15 USB 3.0 Connector (USB56) Signal Signal USB3X5_Z_RX- USB3X5_Z_RX+ USB3X5_Z_TX- USB3X5_Z_TX+ USB_D5- USB_D5+ USB_D6+ USB_D6- USB3X6_Z_TX+ USB3X6_Z_TX- USB3X6_Z_RX+ USB3X6_Z_RX- A.16 USB 2.0 Connector (USB78/ USB910) Signal Signal A.17 SPI BIOS Flash Socket (SPI1) AIMB-275 User Manual...

  • Page 130: Sata Signal Connector (Sata1/ 2)

    Signal Signal MOSI MISO WP# / IO2 HOLD# / IO3 +3.3V A.18 SATA Signal Connector (SATA1/ 2) Signal A.19 SATA/SATA-DOM Signal Connector (SATA3) Signal GND/SATA DOM power AIMB-275 User Manual...

  • Page 131: General Purpose I/O Pin Header (Gpio1)

    GPIO6 GPIO3 GPIO7 +5Vsb A.21 Low Pin Count Header (LPC1) Signal Signal CLK_33M RESET# FRAME# +3.3V SMB_CLK SERIRQ SMB_DATA +5VSB A.22 PS/2 Keyboard and Mouse Connector (KBMS1) Signal Signal KB CLK KB DATA MS CLK MS DATA AIMB-275 User Manual...

  • Page 132: Atx Power Supply (5Vsb) Connector (Atx_5Vsb1)

    MINIPCIE and mSATA Connector (MINI-PCIE1) MINIPCIE: Signal Signal WAKE# +3.3Vaux Reserved Reserved +1.5V CLKREQ# Reserved Reserved REFCLK- Reserved REFCLK+ Reserved Reserved Reserved Reserved DISABLE# DETECT# RESET# PCIE_RX+ +3.3Vaux PCIE_RX- +1.5V SMB_CLK PCIE_TX- SMB_DATA PCIE_TX+ USB_D- USB_D+ +3.3Vaux +3.3Vaux Reserved AIMB-275 User Manual...

  • Page 133: Com Port (Com2)

    Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved DETECT# Reserved +3.3V +1.5V SMB_CLK SMB_DATA Reserved Reserved +3.3V +3.3V Reserved Reserved Reserved Reserved Reserved Reserved +1.5V Reserved MSATA_DETECT# +3.3V A.25 COM Port (COM2) Signal Signal DCD# DSR# RTS# AIMB-275 User Manual...

  • Page 134: Edp/Lvds Backlight Inverter Power Connector (Inv1)

    CTS# DTR# A.26 eDP/LVDS Backlight Inverter Power Connector (INV1) Signal +12V BKL_EN BKL_CTRL A.27 Embedded Display Port Connector (EDP1) Signal Signal EDP0- EDP3- EDP0+ EDP3+ EDP1- EDP1+ EAUX- EAUX+ EDP2- EDP2+ DP_HPD VDD_EDP VDD_EDP AIMB-275 User Manual...

  • Page 135: System Fan Power Connector (Sysfan1)

    A.28 SYSTEM FAN Power Connector (SYSFAN1) Signal +12V DETECT PWM IN A.29 SATA Power Connector (SATA_PWR1/ SATA_PWR2) Signal Signal +V12 A.30 LVDS Panel Connector (LVDS1) Signal Signal LVDS_DET# OD0- ED0- OD0+ ED0+ OD1- ED1- AIMB-275 User Manual...

  • Page 136: Atx 12V Power Supply Connector (Atx12V1)

    ED2+ OCK- ECK- OCK+ ECK+ DDC_CLK DDC_DAT OD3- ED3- OD3+ ED3+ LVDS_ENBKL VCON Note! Please connect Pin3 to any GND pin on LVDS panel to enable LVDS. A.31 ATX 12V Power Supply Connector (ATX12V1) Signal +12V +12V AIMB-275 User Manual...

  • Page 137: Next Generation Form Factor (M.2_1)

    Module Key Module Key Module Key Module Key M.2_CONFIG_0 PCIe wake up# DPR(Dynamic Power GNSS_DISABLE# Reduction) M.2_PCIE_RX1- M.2_PCIE_RX1+ M.2_PCIE_TX1- M.2_PCIE_TX1+ GNSS_SCL M.2_PCIE_RX0+ GNSS_SDA M.2_PCIE_RX0- M.2_PCIE_TX0- M.2_PCIE_TX0+ Platform Reset# Clock request# CLK100M_M.2- PCIE_WAKE# CLK100M_M.2+ SMBUS Data SMBUS Clock AIMB-275 User Manual...

  • Page 138: Screw_80*22Mm (M.2_3)

    Wireless Module SUSCLK(32kHz) Reset# M.2_CONFIG_1 +Vcc(3.3v) +Vcc(3.3v) +Vcc(3.3v) M.2_CONFIG_2 A.33 M.2 Screw _42*22mm & 42*30mm (M.2_2) M.2 Screw_80*22mm (M.2_3) A.34 LVDS VESA, JEIDA format selection pin header (JLVDS_VCON1) Signal +3.3V OPTION AIMB-275 User Manual...

  • Page 139: Case Open Selection Pin Header (Jcaseop_Sw1)

    CASE OPEN Setting CASEOP w/ normal open switch A.36 Case-Open Detect Connector (JCASE1) Signal Intruder# A.37 Watchdog Timer Output and OBS Beep (JWDT1+JOBS1) Signal Watch dog reset# output System reset input# SIO Warning Beep output SP1 Buzzer Beep input AIMB-275 User Manual...
  • Page 140 A.38 SATA Power connector (JSATAPWR1) Function Jumper Setting SATA DOM to GND (Default) 1 and 2 SATA DOM to Power(+5V) 2 and 3 AIMB-275 User Manual...
  • Page 141 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2016...
  • Page 142 Our company network supports you worldwide with offices in Germany, Great Britain, Turkey and the USA. For more information please contact: Distec GmbH FORTEC Elektronik AG Augsburger Str. 2b Lechwiesenstr. 9 82110 Germering 86899 Landsberg am Lech Germany Germany Phone: +49 (0)89 / 89 43 63-0 Phone: +49 (0)8191 / 911 72-0...

Table of Contents