Radius Response-Timeout - TP-Link TL-SG5412F Reference Manual
24-port gigabit l2 managed switch with 4 sfp slots; 12-port gigabit sfp l2 managed switch with 4 combo 1000base-t ports
Hide thumbs
Also See for TL-SG5412F:
- User manual (257 pages) ,
- Cli reference manual (239 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
no radius accounting key
Parameter
key-string ——The shared password for the switch and the accounting servers
to exchange messages which contains 15 characters at most.
Command Mode
Global Configuration Mode
Example
Configure the shared password for the switch and the accounting servers as
tplink:
TP-LINK(config)# radius accounting key tplink
radius response-timeout
Description
The radius response-timeout command is used to configure the maximum
time for the switch to wait for the response from the RADIUS authentication and
the accounting server. To restore to the default value, please use no radius
response-timeout command.
Syntax
radius response-timeout time
no radius response-timeout
Parameter
time ——The maximum time for the switch to wait for the response before
resending a request to the supplicant., ranging from 1 to 9 in second. By default,
it is 3.
Command Mode
Global Configuration Mode
Example
Configure the maximum time for the switch to wait for the response from the
RADIUS authentication and the accounting server as 5 seconds:
TP-LINK(config)# radius response-timeout 5
86
Hide quick links:
Advertisement
Table of Contents
