Chapter 6 Voice Vlan Commands; Voice-Vlan Enable; Voice-Vlan Aging-Time - TP-Link TL-SG5412F Reference Manual
24-port gigabit l2 managed switch with 4 sfp slots; 12-port gigabit sfp l2 managed switch with 4 combo 1000base-t ports
Hide thumbs
Also See for TL-SG5412F:
- User manual (257 pages) ,
- Cli reference manual (239 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
Chapter 6
Voice VLANs are configured specially for voice data stream. By configuring Voice VLANs and
adding the ports with voice devices attached to voice VLANs, you can perform QoS-related
configuration for voice data, ensuring the transmission priority of voice data stream and voice
quality.
voice-vlan enable
Description
The voice-vlan enable command is used to enable Voice VLAN function. To
disable Voice VLAN function, please use no voice-vlan enable command.
Syntax
voice-vlan enable vlan-id
no voice-vlan enable
Parameter
vlan-id —— VLAN ID, ranging from 2 to 4094.
Command Mode
Global Configuration Mode
Example
Enable the Voice VLAN function for VLAN 2:
TP-LINK(config)# voice-vlan enable 2
voice-vlan aging-time
Description
The voice-vlan aging-time command is used to set the aging time for a voice
VLAN. To restore to the default aging time for the Voice VLAN, please use no
voice-vlan aging-time command.
Syntax
voice-vlan aging-time aging-time
no voice-vlan aging-time
Voice VLAN Commands
28
Hide quick links:
Advertisement
Table of Contents
