Chapter 31 Lldp Commands; Lldp Enable; Lldp Hold-Multiplier - TP-Link TL-SG5412F Reference Manual

Chapter 31 LLDP Commands

LLDP function enables network devices to advertise their own device information periodically to
neighbors on the same LAN. The information of the LLDP devices in the LAN can be stored by its
neighbor in a standard MIB, so it is possible for the information to be accessed by a Network
Management System (NMS) using SNMP.

lldp enable

Description
The lldp enable command is used to enable LLDP function. To return to the
default configuration, please use no lldp enable command.
Syntax
lldp enable
no lldp enable
Command Mode
Global Configuration Mode
Example
Enable lldp function globally:
TP-LINK(config)# lldp enable

lldp hold-multiplier

Description
The lldp hold-multiplier command is used to configure the Hold Multiplier
parameter. The aging time of the local information in the neighbor device is
determined by the actual TTL value used in the sending LLDPDU. TTL = Hold
Multiplier * Transmit Interval. To return to the default configuration, please use
no lldp hold-multiplier command.
Syntax
lldp hold-multiplier multiplier
no lldp hold-multiplier
Parameter
multiplier —— Configure the Hold Multiplier parameter. It ranges from 2 to 10.
By default, it is 4.
198