Radius Authentication Port - TP-Link TL-SG5412F Reference Manual

Syntax
radius authentication secondary-ip ip-addr
no radius authentication secondary-ip
Parameter
ip-addr ——The IP address of the alternate authentication server. By default, it
is 0.0.0.0.
Command Mode
Global Configuration Mode
Example
Configure the IP address of the alternate authentication server as 10.20.1.101:
TP-LINK(config)# radius authentication secondary-ip 10.20.1.101

radius authentication port

Description
The radius authentication port command is used to configure the
authentication port of the alternate authentication server. To restore to the
default value, please use no radius authentication port command.
Syntax
radius authentication port port-num
no radius authentication port
Parameter
port-num ——The UDP port of authentication server(s) raging from 1 to 65535
and the default port is 1812.
Command Mode
Global Configuration Mode
Example
Configure the authentication port of the alternate authentication server as 1815:
TP-LINK(config)# radius authentication port 1815
82