Chapter 28 Igmp Commands; Igmp-Snooping Global; Igmp-Snooping Config - TP-Link TL-SG5412F Reference Manual
24-port gigabit l2 managed switch with 4 sfp slots; 12-port gigabit sfp l2 managed switch with 4 combo 1000base-t ports
Hide thumbs
Also See for TL-SG5412F:
- User manual (257 pages) ,
- Cli reference manual (239 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
Chapter 28 IGMP Commands
IGMP Snooping (Internet Group Management Protocol Snooping) is a multicast control
mechanism running on Layer 2 switch. It can effectively prevent multicast groups being
broadcasted in the network.
igmp-snooping global
Description
The igmp-snooping global command is used to configure IGMP globally. To
return to the default configuration, please use no igmp global-snooping
command.
Syntax
igmp-snooping global [status {disable | enable}] [unknown-packet {pass |
discard}]
no igmp-snooping global
Parameter
status —— Enable/Disable IGMP Snooping function globally on the switch. By
default, it is disabled.
unknown-packet —— The operation for the switch to process unknown
multicast, with pass and discard options.
Command Mode
Global Configuration Mode
Example
Enable IGMP Snooping function, and specify the operation to process unknown
multicast as discard:
TP-LINK(config)# igmp-snooping global status enable unknown-packet
discard
igmp-snooping config
Description
The igmp-snooping config status command is used to configure IGMP
Snooping and Fast Leave function for port. To return to the default configuration,
please use no igmp-snooping config command.
160
Hide quick links:
Advertisement
Table of Contents
